Venue 2 Receiver Channel Settings

Right click a channel to open the channel menu.

Several options are shown here:

Choose Settings... to open the Edit Channel Settings dialog.

Shortcut - double clicking a channel also opens the Edit Channel Settings dialog.

 

 

Navigation Buttons

These let you browse back and forth through channels without leaving the Edit Channel Settings dialog once you have opened it..

If a frame icon is selected in the tree view then you can browse only the channels in that frame. If the Session icon is selected in the tree view you can browse through all channels in all frames in the session.

Channel settings are divided into two tabs, one for the receiver settings and another for the transmitter settings.

Receiver Tab

This is the place to view and configure the channel's receiver settings. A mini activity display allows you to monitor the channel while making changes.

Frame Status

This area provides information about the channel's frame. The frame's name and serial number are displayed along with a thumbnail view of the location and status of installed modules.

Receiver Settings

This group holds general receiver settings.

Controls:

Receiver Audio Settings

This group holds receiver module audio settings.

Controls:

Channel Status

Monitors channel activity when connected to receivers.

The meters and indicators are described in the Venue 2 Receiver Channel Monitor topic.

 

Transmitter Tab

This is the place to view and configure the channel's transmitter settings. A mini activity display allows you to monitor the channel while making changes.

Transmitter settings may be configured in this tab and passed to the transmitter over the IR link.

Transmitter Settings

This group holds general transmitter settings.

Controls:

Transmitter Battery Settings

This group holds transmitter battery settings.

Controls:

Send Settings to Tx

Once the edit process is finished, you must send the settings back to the transmitter over the IR link. Make sure the transmitter is powered up and that its IR port is in view of the VRM2WB front panel.

Click Send Settings to Tx. This action will overwrite the settings stored in the transmitter. If the transfer is successful, a confirmation message will appear on the LCD of the transmitter.

Channel Status

Monitors channel activity when connected to receivers.

The meters and indicators are described in the Venue 2 Receiver Channel Monitor topic.