• +1 505 892-4501
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

The Weather Channel Predicts Lectrosonics Wireless System Disaster-Proof

The Weather Channel Logo, Lectrosonics wirelessATLANTA, GEORGIA: The Weather Channel, cable television's only national, all-weather network, has re-equipped its Atlanta headquarters studio facility with all-new Lectrosonics wireless microphone and IFB systems. The new gear includes three Lectrosonics Venue Receiver Systems outfitted with a total of 18 VRS receiver modules and 18 UM400 Digital Hybrid Wireless™ belt-pack transmitters, plus 18 channels of wireless IFB, comprising R1a belt-pack receivers and T1 compact transmitters.

As chief engineer Michael Smereski explains, the new equipment replaces older Lectrosonics RF gear at the facility, which features four studios with a fifth in the planning stage. "Not that we're having problems with any of the older systems, it's just that we try to keep updated on the technology."

For example, he says, "The Venue Receivers provide a lot of enhancements over the receivers we're currently using. As far as engineering tools, their spectrum analysis display, their ability to record mic tests and the appropriate RF level at the same time, in addition to determining dropout spots are all greatly beneficial. We're really excited about those tools."

The engineering staff is taking a slightly different approach to the new installation, shares Smereski. "We're in the process of adding some new studio facilities and we decided that, instead of having a centralized set of mics just in the main studio, we'd design a system - with TAI Audio and Lectrosonics' help--that could utilize any mic, any location, any studio. So we're housing electronics centrally and using a matrixed antenna system to not only get the receive on our mics but also the IFBs to any one of our studio locations in the facility."

Although The Weather Channel is located quite a ways north of the major television production facilities in downtown Atlanta, there can still be some RF interference. "We have a lot of other wireless devices, besides microphones, that are active in the system," he explains. "The Lectrosonics analysis tools, which will be hooked up to a computer for monitoring and logging purposes, will be a great asset. Having the ability to look and see what's out there and see what may be interfering with our signals, and being able to adjust that, is a great benefit to us. Plus, we're moving from a fixed frequency system to a frequency agile system, which helps us out a lot as well."

The Lectrosonics receivers and transmitters being replaced have been trouble-free, according to Smereski. "They've been extremely reliable; so reliable that we don't dual-mic our talent, we just single-mic them. And we're live 21 hours a day. The Lectrosonics gear has been a great performer for us."

He elaborates, "We typically don't have difficulties with the transmitters or the receivers. It's rare for a receiver to have any problems. And typically, with the transmitters, there is just mechanical wear on the antennas. More often than not we're just maintaining the lavalier microphones, which are not Lectrosonics."

The new equipment will be in place before the network's busiest time of the year - hurricane season. "We do a lot of projects and upgrades, as well as maintaining the network, but when we get into that August timeframe we shut down any of the project work we're doing and focus purely on broadcast coverage," comments Smereski. "It can get quite hectic."

About Lectrosonics

Well respected within the film, broadcast, and theater technical communities since 1971, Lectrosonics wireless microphone systems and audio processing products are used daily in mission-critical applications by audio engineers familiar with the company's dedication to quality, customer service, and innovation. Lectrosonics is a US manufacturer based in Rio Rancho, New Mexico.