SMWB, SMDWB Firmware Update v8.04 (SUPER)/v8.04 (FPGA)/v8.01 (BOOT) - 13 January 2023
- Initial release of firmware for new product shipping with 8.xx firmware. It contains no new features. Do not install in units with 1.xx, 6.xx or 7.xx firmware.
SMWB, SMDWB Firmware Update v6.62 - 21 October 2022
- Resetting unit to factory defaults now resets menu cursors to starting location.
- Implement changes for ease of manufacturing. No new features.
SMWB, SMDWB Firmware Update v7.13 - 21 October 2022
- Implement changes for ease of manufacturing. No new features.
SMWB, SMDWB Firmware Update v6.61 - 26 January 2022
- Eliminate a 2.75 kHz audio tone audible in some units when the Remote Control feature was enabled.
- Improve reliability of "auto-on" operation.
SMWB, SMDWB Firmware Update v7.12 - 27 December 2021
- Eliminate a 2.75 kHz audio tone audible in some units when the Remote Control feature was enabled.
- Improved reliability of "auto on" operation.
- Menu cursor is now reset to the first item when default settings are restored.
SMWB, SMDWB Firmware Update v6.57 - 23 December 2021
- The Clock setup page now shows running seconds and allows the seconds field to be edited.
- The accuracy of battery telemetry reporting has been improved. Transmitters that have already been calibrated at the factory will remain correctly calibrated when taking this update.
- The LCD backlight "off" setting now operates correctly after a power cycle.
- Fix bug causing user interface to freeze when viewing the details of a take.
- Added automatic SD card filesystem consistency check.
SMWB, SMDWB Firmware Update v7.11 - 30 August 2021
- The Clock setup page now shows running seconds and allows the seconds field to be edited.
- The accuracy of battery telemetry reporting has been improved. Transmitters that have already been calibrated at the factory will remain correctly calibrated when taking this update.
- The LCD backlight "off" setting now operates correctly after a power cycle.
SMWB, SMDWB Firmware Update v7.10 - 17 January 2020
- Fix bug causing user interface to freeze when viewing the details of a take.
- Added automatic SD card filesystem consistency check.
SMWB, SMDWB Firmware Update v7.09 - 31 October 2019
- Long recordings are now split into 4 GB segments to increase maximum recording time.
SMWB, SMDWB Firmware Update v6.56 - 31 October 2019
- Long recordings are now split into 4 GB segments to increase maximum recording time.
SMWB, SMDWB Firmware Update v7.08 - 28 August 2019
- Released for SMWB, SMWB/X with serial number 1501 and higher, and SMDWB, SMDWB/X with serial number 1601 and higher only.
- Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)
SMWB, SMDWB Firmware Update v6.54 - 28 August 2019
- Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)
SMWB, SMDWB Firmware Update v7.07 - 27 August 2019
- Released for SMWB, SMWB/X with serial number 1501 and higher, and SMDWB, SMDWB/X with serial number 1601 and higher only.
- Transmitter now handles failed IR sync operations more gracefully.
- The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled "OK" to confirm.
SMWB, SMDWB Firmware Update v6.53 - 27 August 2019
- Corrected absolute audio polarity.
- Transmitter now handles failed IR sync operations more gracefully.
- The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled "OK" to confirm.
SMWB, SMDWB Firmware Update v7.06 - 01 April 2019
- Released for SMWB, SMWB/X with serial number 1501 and higher, and SMDWB, SMDWB/X with serial number 1601 and higher only.
- Corrected absolute audio polarity.
SMWB, SMDWB Firmware Update v6.52 - 12 December 2018
- Made changes to streamline production testing at the factory.
SMWB, SMDWB Firmware Update v6.51 - 06 December 2018
- Increased maximum length of recording segment to 4 GB.
- Added iXML header support (including scene and take numbers).
- Added a new file naming template and improved existing templates.
- Enhanced file browsing and recovery capabilities to be able to work with files from other Lectrosonics recording products.
- Made file system more robust in the event that a computer operating system adds housekeeping files while copying recordings from the card.
- Improved (faster) display performance.
SMWB, SMDWB Firmware Update v6.03 - 24 October 2018
- Fix bug where "Mode 3" and "IFB" compatability modes had incorrect audio modulation scaling. This did not affect the "Nu Hybrid" compat mode.
SMWB, SMDWB Firmware Update v6.02 - 11 October 2018
Introduces "Nu Hybrid" compat mode, which replaces the legacy "400" mode. "Nu Hybrid" mode conforms to the ETSI standard now in effect for wireless microphone transmitters in the United States. Version 6.x firmware is for use in units shipping with these FCC ID numbers:
- DBZSMDWBA1A
- DBZSMDWBB1A
All new product shipped after October 13th, 2018 to US customers will bear these FCC ID numbers and use 6.x firmware.
SMWB, SMDWB Firmware Update v1.07 - 06 August 2018
- Added safeguards to prevent loss of stored settings.
- Audio LEDs now turn off at the end of the powerdown sequence.
- Recordings no longer have a small click sound at the beginning.
SMWB, SMDWB Firmware Update v1.06 - 20 March 2018
- Fixed problem where a "sleeping" transmitter could not always be awakened.
- Do not "resurrect" deleted volume labels on SD cards.
SMWB, SMDWB Firmware Update v1.04 - 11 October 2017
- Initial public release.
