SMWB/E01, SMDWB/E01 Firmware Update v8.04 (SUPER)/v8.04 (FPGA)/v8.01 (BOOT) - 13 January 2023
- Initial release of firmware for new product shipping with 8.xx firmware. It contains no new features. Do not install in units with 1.xx or 2.xx firmware.
SMWB/E01, SMDWB/E01 Firmware Update v2.10 - 21 October 2022
- Implement changes for ease of manufacturing. No new features.
SMWB/E01, SMDWB/E01 Firmware Update v1.56 - 26 January 2022
- Eliminate a 2.75 kHz audio tone audible in some units when the Remote Control feature was enabled.
- Improve reliability of "auto-on" operation.
- The Clock setup page now shows running seconds and allows the seconds field to be edited.
- The accuracy of battery telemetry reporting has been improved. Transmitters that have already been calibrated at the factory will remain correctly calibrated when taking this update.
- The LCD backlight "off" setting now operates correctly after a power cycle.
- Fix bug causing user interface to freeze when viewing the details of a take.
- Added automatic SD card filesystem consistency check.
SMWB/E01, SMDWB/E01 Firmware Update v2.09 - 27 December 2021
- Eliminate a 2.75 kHz audio tone audible in some units when the Remote Control feature was enabled.
- Improved reliability of "auto on" operation.
- Menu cursor is now reset to the first item when default settings are restored.
SMWB/E01, SMDWB/E01 Firmware Update v2.08 - 30 August 2021
- The Clock setup page now shows running seconds and allows the seconds field to be edited.
- The accuracy of battery telemetry reporting has been improved. Transmitters that have already been calibrated at the factory will remain correctly calibrated when taking this update.
- The LCD backlight "off" setting now operates correctly after a power cycle.
- The Defaults menu command now clears the Block 606 legacy mode if it had been selected.
SMWB/E01, SMDWB/E01 Firmware Update v2.06 - 17 January 2020
- Fix bug causing user interface to freeze when viewing the details of a take.
- Added automatic SD card filesystem consistency check.
SMWB/E01, SMDWB/E01 Firmware Update v2.04 - 31 October 2019
- Long recordings are now split into 4 GB segments to increase maximum recording time.
SMWB/E01, SMDWB/E01 Firmware Update v1.53 - 31 October 2019
- Long recordings are now split into 4 GB segments to increase maximum recording time.
SMWB/E01, SMDWB/E01 Firmware Update v2.03 - 28 August 2019
- Released for SMWB/E01 with serial number 301 and higher, and SMDWB/E01 with serial number 401 and higher only.
- Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)
SMWB/E01, SMDWB/E01 Firmware Update v1.52 - 28 August 2019
- Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)
SMWB/E01, SMDWB/E01 Firmware Update v2.02 - 27 August 2019
- Released for SMWB/E01 with serial number 301 and higher, and SMDWB/E01 with serial number 401 and higher only.
- Transmitter now handles failed IR sync operations more gracefully.
- The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled OK" to confirm.
SMWB/E01, SMDWB/E01 Firmware Update v1.51 - 27 August 2019
- Corrected absolute audio polarity.
- Transmitter now handles failed IR sync operations more gracefully.
- The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled "OK" to confirm.
SMWB/E01, SMDWB/E01 Firmware Update v2.01 - 01 April 2019
- Released for SMWB/E01 with serial number 301 and higher, and SMDWB/E01 with serial number 401 and higher only.
- Corrected absolute audio polarity.
SMWB/E01, SMDWB/E01 Firmware Update v1.50 - 20 December 2018
- Increased maximum length of recording segment to 4 GB.
- Added iXML header support (including scene and take numbers).
- Added a new file naming template and improved existing templates.
- Enhanced file browsing and recovery capabilities to be able to work with files from other Lectrosonics recording products.
- Made file system more robust in the event that a computer operating system adds housekeeping files while copying recordings from the card.
- Improved (faster) display performance.
SMWB/E01, SMDWB/E01 Firmware Update v1.07 - 06 August 2018
- Added safeguards to prevent loss of stored settings.
- Audio LEDs now turn off at the end of the powerdown sequence.
- Recordings no longer have a small click sound at the beginning.
SMWB/E01, SMDWB/E01 Firmware Update v1.06 - 20 March 2018
- Fixed problem where a "sleeping" transmitter could not always be awakened.
- Do not "resurrect" deleted volume labels on SD cards.
SMWB/E01, SMDWB/E01 Firmware Update v1.05 - 04 December 2017
- Corrected pilot tone frequencies for frequency block 606 legacy feature.
SMWB/E01, SMDWB/E01 Firmware Update v1.04 - 11 October 2017