SMWB/X, SMDWB/X Firmware Revision History

Click here for firmware downloads

SMWB/X, SMDWB/X Firmware Update v2.04 - 31 October 2019

  • Long recordings are now split into 4 GB segments to increase maximum recording time.

SMWB/X, SMDWB/X Firmware Update v1.53 - 31 October 2019

  • Long recordings are now split into 4 GB segments to increase maximum recording time.

SMWB/X, SMDWB/X Firmware Update v2.03 - 28 August 2019

  • Released for SMWB/X with serial number 1501 and higher, and SMDWB/X with serial number 1601 and higher only.
  • Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)

SMWB/X, SMDWB/X Firmware Update v1.52 - 28 August 2019

  • Fixed problem sometimes resulting in the message "NO RESPONSE FROM CARD" was displayed at the end of a recording. (The recording was intact but it was necessary to turn the transmitter off and on again before using the card again.)

SMWB/X, SMDWB/X Firmware Update v2.02 - 27 August 2019

  • Released for SMWB/X with serial number 1501 and higher, and SMDWB/X with serial number 1601 and higher only.
  • Transmitter now handles failed IR sync operations more gracefully.
  • The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled "OK" to confirm.

SMWB/X, SMDWB/X Firmware Update v1.51 - 27 August 2019

  • Corrected absolute audio polarity.
  • Transmitter now handles failed IR sync operations more gracefully.
  • The "slow card" warning page has been made more informative and less alarming. The "REC" icon continues to blink as the verbiage "Warning: slow card" is displayed. The BACK button is soft-labeled "OK" to confirm.

SMWB/X, SMDWB/X Firmware Update v2.01 - 01 April 2019

  • Released for SMWB/X with serial number 1501 and higher, and SMDWB/X with serial number 1601 and higher only.
  • Corrected absolute audio polarity.

SMWB/X, SMDWB/X Firmware Update v1.50 - 20 December 2018

  • Increased maximum length of recording segment to 4 GB.
  • Added iXML header support (including scene and take numbers).
  • Added a new file naming template and improved existing templates.
  • Enhanced file browsing and recovery capabilities to be able to work with files from other Lectrosonics recording products.
  • Made file system more robust in the event that a computer operating system adds housekeeping files while copying recordings from the card.
  • Improved (faster) display performance.