M2T Firmware Revision History

Click here for firmware downloads

 

WD Firmware Update v08Nov2018

M2T v2.0.01 (SUPER)/v2.00 (FPGA)

  • Switched to new high-resolution audio format which delivers superior performance. This new format is NOT compatible with the original Duet format. If this version is used, all components of the Duet system, M2T and M2R, must be upgraded for interoperability. Alternatively, newer components may be downgraded to v1.x firmware for use with older components if desired.
  • Create button-combination shortcut on main page for RF carrier enable/disable. See the manual for details.

WD Firmware Update v23Aug2018

M2T v1.0.04 (SUPER)/v1.01 (FPGA)

  • Improved SINAD of headphone monitor output at lower output levels.

WD Firmware Update v25Jan2018

M2T v1.0.03 (SUPER)/v1.01 (FPGA)

  • Revise "SYNC FLEXLIST" feature. The user is now prompted to choose 1 of 3 options:
    • "Stereo Mix". When chosen, the current receiver settings are sent "as is", except that the mix mode is forced to Stereo.
    • "Mono Ch. 1 Only". When chosen, the current receiver settings are sent "as is", except that the mix mode is forced to Mono Ch. 1.
    • "Mono Ch. 2 Only". When chosen, the current receiver settings are sent as is, except that the mix mode is forced to Mono Ch. 2.
  • Add a "Quick Sync" function to the main page. This allows the user to sync an M2R rapidly by means of a long (1 sec) press of one of the channel select buttons (A1, A2, A3, A4) on the front panel. Two sync modes are available: "SYNC ALL" and "SPLIT MONO". The mode is selected from the "FRONT PANEL SETUP" menu, which is expanded to include a new item name "QUICK SYNC MODE". This item offers a pair of radio buttons to choose the mode.
    • In SYNC ALL mode, a long press of either the A1 or A2 buttons sends all RX1 settings. A long press of either the B1 or B2 buttons sends all RX2 settings.
    • In SPLIT MONO mode, a long press of the A1 button sends all RX1 settings with the mix mode forced to Mono Ch. 1. A long press of the A2 buttons sends all RX1 settings with the mix mode forced to Mono Ch. 2. A long press of the B1 button sends all RX2 settings with the mix mode forced to Mono Ch. 1, and a long press of the B2 button sends all RX2 settings with the mix mode forced to Mono Ch. 2.

WD Firmware Update v13Dec2017

M2T v1.0.02 (SUPER)/v1.01 (FPGA)

  • Corrected reversed Dante input channel assigments.

WD Firmware Update v20Oct2017

M2T v1.0.02 (SUPER)/v1.00 (FPGA)

  • Change "factory default" frequencies of operation to 512.000 MHz and 590.000 MHz.

WD Firmware Update v12Oct2017

M2T v1.0.01 (SUPER)/v1.00 (FPGA)

  • Fixed bug that resulted in invalid network settings when a 'default' serial command was received.
  • Improved operation of headphone monitor volume control to eliminate "zipper" noise when turned.