• +1 505 892-4501
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

SPN32i

Lectrosonics SPN32i - ASPEN Series Digital Signal Processor


32 inputs, 2RU:

SPN32i Description|active

      • Unlimited input expansion
      • TCP/IP Ethernet Addressable
      • Seamless auto-mixing with PGA™
      • 48-channel mix bus with full output matrixing
      • Simultaneous multi-point 3rd party and native control
      • Ultra-low 1.33 ms near-side latency for real-time audio

Add inputs to your ASPEN system easily with the 16i and 32i input-only units. High-resolution, low-noise microphone preamplifiers featuring true 48 V phantom power provide studio-grade mic/line inputs for your audio system. The 1 Gbs ASPEN port ties these units to others in the stack with ultra-low latency of 1.33 ms for the 16i and 1.46 ms for the 32i.

SPN32i Specifications|closed

Specifications for SPN32i Unit:

ASPEN port: 1Gbs control and audio data between ASPEN units

Inputs:

  • SPN16i: 16 mic/line
  • SPN32i: 32 mic/line

Gain: 0 dB to 56 dB, programmable in 8 dB steps
Input Level: 0 dBu nominal, max 20dBu
Input Impedance: 8 k Ohms differential mode, 2 k Ohms common mode
Phantom Power: True 48 Volt
Dynamic Range: 102 dB
EIN: -127 dBu (20 Hz - 20 kHz, unweighted)
THD + noise: 0.01%
Frequency Response: 20 Hz – 21 kHz ± 1 dB

Latency:

  • SPN16i: 1.33 ms
  • SPN32i: 1.46 ms

Included Accessories|closed

    • 1 - Power Cord (Part #21499)
    • 2 - Cord Plug (Part #21558)
    • 16 - 5-position Plug (Part #21580)
    • 1 - USB Cable (Part #21713)
    • 2 - Patch Cable (Part #21802)
    • 1 - Adjustment Tool (Part #35679)
    • 1 - Software CD (Part #ASPENNETWIN)
    • 1 - Manual

Optional Accessories & Replacement Parts|closed

SPN32i Accessories

{slider Data Sheet|closed}

Manual|closed