Setting Compatibility Modes For Lectrosonics R400 Digital Hybrid Wireless™ Receiver
One of the benefits of Lectrosonics Digital Hybrid Wireless™ is its ability to operate with non-Digital
Hybrid Wireless™ products, such as Lectrosonics 100 Series, 200 Series, 300 Series (European) and other analog systems.
This technical note covers discovering and changing (if necessary) the compatibility mode of a typical Lectrosonics Digital
Hybrid Wireless™ transmitter.
Setting Compatibility Mode
Ensure receiver and associated transmitter are turned off.
Push the POWER/PREV MENU button on the R400 front panel. After a few seconds, the Main Window will appear.
Push the MENU/SELECT Control the access the TopMenu. Press the MENU/SELECT Control again to display the SetUpRx Menu.
Rotate the MENU/SELECT Contol to highlight Compat, then press the MENU/SELECT Control to access the Compat Setup Screen.
Rotate the MENU/SELECT Control to display the Compatibility Mode matching the associated transmitter. The available
Compatiblity Modes are:
400 - This is the factory default setting and works with all Lectrosonics 400 Series and 500 Series (European)
Digital Hybrid Wireless™ transmitters. This mode offers the best audio quality.
100 - This mode works with all Lectrosonics 100 Series compatible transmitters.
200 - This mode works with all Lectrosonics 200 Series and 300 Series (European) compatible transmitters.
MODE 3 - This mode works with a number of non-Lectrosonics analog transmitters. Contact the company for a list
of compatible transmitters.
IFB - This mode works with all Lectrosonics IFB compatible transmitters. (requires Firmware version 1.5 and later.)
Press
POWER/PREV MENU until the Main Windows appears.
