Wired Remote Level Attenuator
- Connects directly to the Remote Level Control Port on the AM8 (DB15 connector) and the Programmable Input on the AM16/12 and AM8/4 mixers (DB25 connectors)
- Can be configured to control master level, channel level, or multiple input channels on the AM8
- Can be configured to control the programmable input volume on the AM16/12 and AM8/4 mixers
- Jumper selectable attenuation range, 15dB or 30dB w/Mute
The RCW-VLS provides remote level attenuation for one or more mixer channels or it can act as a master level attenuator. Several individual microphone channels on the AM8 can be controlled simultaneously if the wiper contacts from those channels are hard-wired together. For the AM16/12 and AM8/4, the LecNet software is required to configure these devices for control of multiple channels
The RCW-VLS is a rotary control mounted on a circuit board and single-gang wall plate for use with the AM8, AM 8/4 or AM16/12 automatic mixers. The rotary action is detented for a smooth, accurate feel. The unit can be connected to individual channels in any combination or to the main output of the AM8. Fully clockwise, no attenuation is applied. Fully counter clockwise, the level is either completely attenuated or is reduced to -15dB, depending on how the jumper is set on the circuit board.