Variable Power Super-Miniature Digital Hybrid Wireless®
UHF Belt Pack Transmitters
plus RM remote control
• SMV Single Battery • SMQV Dual Battery
- Digital Hybrid Wireless™ Technology*
- Variable, selectable power output:
- SMV: 50, 100mW
- SMQV: 50, 100, 250mW
- Membrane switch control panel with LCD display
- 256 synthesized UHF frequencies
- Wide input dynamic range
- DSP based pilot-tone signal
- Circulator/Isolator output stage
- Splash-proof, machined aluminum housing
- Non-corrosive, superhard finish
To meet the demand for both extended operating range and extended battery life, the “V” series SM transmitters offer selectable output power of 100 or 250 mW. A third selection at 50 mW is provided for some theatrical applications where the system design specifies lower transmitter power.
The input section features the unique servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB for excellent overload protection and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion. The limiter recovers quickly from brief transients, with no audible side effects, and also recovers slowly from sustained high levels to keep audio distortion low while preserving short term dynamics.
Consumer Alert:
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone web site at www.fcc.gov/cgb/wirelessmicrophones.
| SMBCUP Accessory belt clip for attaching the SM with the antenna pointing up. |
PSMD Snug fitting leather pouch protects SMD/Q housing and provides a belt clip. |
SMBCDNSL Spring-loaded belt clip for attaching a single-battery SM with the antenna pointing down. |
 |
 |
 |