Aspen Series (156)
Audio Cables (31)
IFB (77)
Microphone (93)
Portable Receiver (279)
Power Cables (32)
Remote Antenna (126)
Studio Receiver (80)
Transmitter (215)
#13585
Description:
Screw on mic clip for standard mic stands with 5/8"-27 thread to hold all UT series Handheld Transmitters
#14040
Description:
Vinyl general purpose shoulder strap.
#21359
Description:
Female, 5-pin TA5F plug
#21425
Description:
6 ft. long power cord, coaxial to stripped & tinned leads. Coaxial plug: ID-.080"; OD-.218"; Depth- .5".
#21472
Description:
6 ft. long power cord; coaxial to stripped & tinned leads. Right angle coaxial plug: ID-.075"; OD-.218"; Depth- .375". Fits all compact receiver models that use CH12 power supply. ...
Read More...
#21499
Description:
AC power cord female LEC320 to Edison plug
#21511
Description:
AC power cord stripped, ready for installation of appropriate AC power plug.
#21551
Description:
12" cable, 9-pin Mini-DIN to Mini-DIN
#21552
Description:
15 ft. wall to phone cable with standard RJ-11 connectors
#21558
Description:
D-25 pin female plug
#21586
Description:
6 ft. long power cable; locking LZR type plug to stripped and tinned leads.
#21592
Description:
24" 8-pin Mini-DIN to Mini-DIN cable
#21642
Description:
Euro power plug, CEE 7/7 (Schuko) plug
#21643
Description:
UK power cord BS 1363 plug
#21644
Description:
Australian power cord S3112 plug
#21710-1
Description:
AMX/Crestron cable
#21713
Description:
MB USB A2B cable
#21716
Description:
12" CAT-5 RJ 45 cable.
NOT Compatable with Aspen Series
#21750
Description:
Polarity-reversing (pin 2 to 3 , 3 to 2) XLR barrel adapter used with HM and UH400 transmitters. Commonly used with some Earthworks test mics to reduce current draw and excess noise.
#21762
Description:
Neutrik right angle XLR female connector with 5 selectable cable outlet positions; cast metal housing.
#21769
Description:
Female BNC to female BNC connector. Commonly used to interface cables to whip antennas or to connect two cables. Minimal loss, 50 Ohms.
#21770
Description:
Male SMA to female BNC Adapter
#21793
Description:
SMA right angle adapter, male to female, for SMA antennas
#21798
Description:
USB cable for firmware updates; USB 2.0 to mini-b; 2 meter length.
#21803
Description:
12" Cat-6 cable for connecting ASPEN units.
#24719
Description:
Blue Velcro cable wrap with Lectro logo.
#26311
Description:
Light stand adapter, 1/2" diameter, 6" long, 3/8-16 thread, stainless steel
#26312
Description:
Thread adapter, 1/2" diameter, 1 3/4" long, 3/8"-16 & 1/4"-20 threads, stainless steel
#26313
Description:
Mic stand adapter, 1 1/2" long, 5/8-27 & 3/8-16 threads Mic stand adapter, stainless steel
#26481
Description:
Audio plug cover for MM400 transmitters.
#28407
Description:
Replacement lock washer for SNA600 mounting kit.
#28769
Description:
Antenna mounting stud/thread adapter, stainless steel with hex socket for mounting & removal, 3/8"-16
NOTE: 3/8"-16 is included with remote antenna.
#28770
Description:
Antenna mounting stud, stainless steel with hex socket for mounting & removal. Stud side coated with red Loctite, 1/4"-20
#28790
Description:
Replacement nut for SNA600 mounting kit. 3/8"-16 Stainless Stell hexnut.
#28832
Description:
Replacement set screw for all SM Series belt clips, both spring wire and hinged.
#35554
Description:
Push-in plug dust cover for any chasis mounted TA3M or TA5M jack.
#35679
Description:
Lectrosonics screwdriver and adjustment tool for setting transmitter gain and rolloff pots as well as for setting the frequency switches on some older receivers and transmitters.
#35690
Description:
Strain relief clip-on for lavaliere mic cords. Clips to clothing to support and guide the lavaliere mic cable.
#35746
Description:
Replacement ear cushion for M142 and M152 headset microphones.
#35804
Description:
Leather pouch for handheld transmitters such as the UT.
#35908
Description:
Adhesive battery strap for easy removal of NP1 style batteries. BATTERY NOT INCLUDED.
#35923
Description:
Hypoallergenic thermal insulation pad for SM & SMa single battery transmitters. Placed on the back of the transmitter to prevent the transmitter from feeling warm to sensitive talent ...
Read More...
#35924
Description:
Hypoallergenic thermal insulation pad for SMd & SMq dual battery transmitters. Placed on the back of the transmitter to prevent the transmitter from feeling warm to sensitive talent. ...
Read More...
#35939
Description:
Replacement blue canvas zipper case for HM172 Earset Mic.NOTE: HM172 mic sold seperately
#A195RA
Description:
Right angle VHF helical whip antenna for CR187 and other 170 and 180 series portable receivers.
#A195S
Description:
Straight VHF helical whip antenna for CR187 and other 170 and 180 series portable receivers.
#A500RA (Specify Block)
Description:
UHF antenna, right angle BNC. Specify block such as A500RA-24 for block 24. These antennas can be used one block above and below the specified block. Color coded tip per ANSI resistor co ...
Read More...
#A500S
Description:
Flexible UHF antenna, straight BNC 470-608. It is now recommended to use the #A8U antenna (block 22) for replacement.
#A7U
Description:
UHF antenna for UM190 & UM195 470-608 MHz It is now recommended to use the #AMM antenna (block 22) for replacement.
#A8U (Specify Block)
Description:
UHF antenna, straight BNC. Specify block such as A8U-24 for block 24. These antennas can be used one block above and below the specified block. Color coded tip per ANSI resistor code.
...
Read More...