 |
|
Lectrosonics offers a full range of automatic mixers, audio matrix mixers, audio signal processors, digital telephone hybrid interfaces and other equipment for professional audio installations, including products to accommodate special requirements such as touch screen remote control and audio controlled video switching using touch panels and switchers from other manufacturers. Many of these products incorporate LecNet software to simplify and expand the setup and configuration of sound systems. The software runs under the Microsoft Windows® 95/98 and NT operating systems and communicates with an RS-232 compatible interface built into LecNet components. LecNet™ is also available for download.
Note
LectNet2™ software and components are not compatible with the older LecNet™ sofware or components.
(See also Power Source Matrix)
Windows® is a registered trademark of Microsoft Corp.
AMX® is a registered trademark of AMX - Corp.
CrestronTM is a trademark of Crestron Electronics, Inc.
 |
AM16/12 16-channel mic/line auto mixer with a 16 x 12 programmable matrix mixer in a 2-space 19" rack mount package. Eight assignable NOM buses. Room combining for up to four rooms. Setup and programming requires computer, using the supplied LecNet™ software. Includes connectors and serial cable. |
 |
AM8/4 8-channel mic/line auto mixer with 2 additional line inputs and a 10 x 4 matrix mixer with 4 output channels and a full crosspoint matrix system in a single rack space. Eight built-in nonvolatile preset memory configurations allow complete flexibility to adapt to a wide variety of applications. Includes LecNet™ software, connectors and serial cable. |
 |
AM8 8-channel mic/line auto mixer with direct outputs on each channel. Microprocessor controlled, adaptive gain proportional mixing algorithm minimizes feedback, improves intelligibility and reduces background noise. VCA taps for remote level control. Includes LecNet™ software, connectors and serial cable. |
 |
AM8TC Same as AM8, plus trimpot controls for LF (bass) and HF (treble) on each channel. Includes LecNet™ software, connectors and serial cable. |
 |
DSP4/4 (single) Sophisticated 4in/4out DSP based audio signal processor with matrix controllable channel assignments. Includes programmable notch filters with auto feedback eliminator, parametric EQ, compressor/limiter, variable bass-cut and shelving controls. Supplied with LecNet™ software, connectors for both units and serial cable. |
 |
DSP4/4 (dual) Two DSP4/4 single units in a single enclosure. Each 4in/4out processor is a discrete device, with no matrix control between the two units. The idea is to save cost and rack space. Supplied with LecNet™ software, connectors for both units and serial cable. |
 |
MM8 12 in / 8 out line level matrix mixer that can be programmed for instant recall of up to 9 different configurations, 6 of which are available with a contact closure between connections on the rear panel. Built-in pink noise generator for sound masking applications. See also accessories. |
 |
PA8 power amplifier with 8 discrete channels for use with Mix Minus sound reinforcement systems. Adjacent channels can be bridged for higher output power. Passively cooled and fully protected from heat, shorts and open connections. See also accessories. |
 |
TH3A Digital telephone hybrid telephone interface with digital line echo cancelling, echo suppression and digital acoustic echo canceller. The hybrid participates in the patented LecNetTM mixing algorithm to provide additional anti-echo processing. The design provides full duplex operation over 2-wire telephone systems and 4-wire video codecs, or both simultaneously. Features include auto answer, auto disconnect, dailing and level meters for easy set up. Includes LecNetTM software, connectors and serial cable. |