(505) 892-4501
(800) 821-1121 toll-free
(505) 892-6243 fax

HOME Products: Wireless Audio Processing IFB Long Ranger Accessories Discontinued Resources: FAQs Repair Services Frequency Tables Microphone Wiring TV Station Lookup Tech Notes White Papers Discussion Group LecNet2 School Downloads: Manuals Catalog LecNet2™ LecNet™ Company Info: About Us Contact Us Employment

Long Ranger 4 Wireless Sound System
Latest generation of the highest output portable PA system available. The integral wireless microphone system and rechargeable gel-cell batteries make this system extremely versatile.

LONG RANGER IV
Fast charge circuit charges batteries in only 3 hours or less. Charger also works as AC power supply allowing full power output from the amplifier when connected to 100-240 VAC. Unit can also be powered from external 12 VDC sources through a jack on the front panel. Built in power amp delivers 33 Watts RMS into the re-entrant horn, producing over 120 dB at 3 feet in front of the horn. External speaker jacks are provided for use with other speakers indoors, or an additional horn speaker for a broader coverage pattern outdoors.

See also Headsets, and M119 and M140 Lavaliere Microphones.

ADD-ON (second channel) WIRELESS SYSTEMS
A second wireless receiver can be added to the Long Ranger II, Long Ranger III and Long Ranger 4 main units to pick up a signal from a second wireless transmitter and deliver the sound through the Long Ranger speaker. The LR175 receiver mounts on the rear panel and picks up power directly from the main unit. A second antenna is built into the front of the speaker horn for the add-on receiver. The audio output of the add-on receiver is fed into the AUX mic input on the Long Ranger control panel.
Add-on systems include the LR175 receiver, and the same options for transmitter and microphone as the Long Ranger itself.
H175DC Plug-on Transmitter
Machined aluminum “plug-on” transmitter with DCSTM digital code system for noiseless turn on/turn off and reliable squelch control. Lo Z input for any mic with an XLR connector. 5V DC phantom power. Operates on a single 9V alkaline battery for up to 14 hours. Variable input gain adjusts for microphone type and user's voice level. Continuous battery status LED. Uses microphone body and transmitter housing as antenna. 30dB input limiter. Supplied with 9V alkaline battery.

Optional fabric pouch available.

M175 Belt-pack Transmitter
Constructed of rugged machined aluminum for lasting ruggedness. Both models accept Lectrosonics electret microphones with the locking micro (MC) connector.

The design provides a spring-loaded belt-clip and attached battery door. Battery status is indicated by an LED on the control panel. Battery life is 12 hours or more on a single alkaline 9 volt.

M175LS Belt-pack Transmitter
Constructed of rugged machined aluminum for lasting ruggedness. Both models accept Lectrosonics electret microphones with the locking micro (MC) connector. The M175LS offers a microphone mute switch in addition to the power switch.

The design provides a spring-loaded belt-clip and attached battery door. Battery status is indicated by an LED on the control panel. Battery life is 12 hours or more on a single alkaline 9 volt.