(505) 892-4501
(800) 821-1121 toll-free
(505) 892-6243 fax

HOME Products: Wireless Audio Processing IFB Long Ranger Accessories Discontinued Resources: FAQs Repair Services Frequency Tables Microphone Wiring TV Station Lookup Tech Notes White Papers Discussion Group LecNet2 School Downloads: Manuals Catalog LecNet2™ LecNet™ Company Info: About Us Contact Us Employment
LecNet2™ Accessories
DM1624, DM1612, DM812, DM84, DMTH4, DMPA12
The items listed on this page are included with the DM Series Digital Auto Mixers, along with the
Owner’s manual and a LecNet2™ CD. (See also Battery Chargers and Power Supplies)


Note: LectNet2™ software and components are not compatible with the older LecNet communications sofware and it will not run on older systems designed for LecNet™.

Windows® is a registered trademark of Microsoft Corp.; AMX® is a registered trademark of AMX - Corp.;
Crestron™ is a trademark of Crestron Electronics, Inc.

RCWPB8
Pushbutton Remote Control for DM Series Processors.
Extensive remote control functions for DM Series processors can be implemented easily and inexpensively with the RCWPB8 switch panel. LEDs built into each switch indicate various functions and states at a glance.
Typical control functions include recalling presets to configure the sound system for particular purposes, muting and enabling sound masking, level controls at single or groups of inputs or outputs, signal routing changes and numerous other custom functions created using macros in the processor

Click Here to view Data Sheet (PDF)

RCWPB4
Wallplate Control Interface for DM Series.
The RCWPB4 is a control interface for Lectrosonics DM Series processors to provide a variety of remote control operations. The unit is connected to the 25-pin D-sub connector on the rear panel of a DM Series processor. The most common use is to make changes in the setup of a DM Series processor by launching macros and recalling presets.

Click Here to view Data Sheet (PDF)

RCWTH4

Remote Control for use with DMTH4. Provides table top control of basic functions:

  • Connect/Disconnect
  • Privacy
  • Receive Volume Up
  • Receive Volume Down

Click Here to view Data Sheet (PDF)

21529-1
LecNet serial cable, DB-9 to 3.5mm stereo mini plug, Black; for connecting computer COM port to rear panel RS232 serial input jack.

21710-1
LecNet serial cable, DB-9 to 3.5mm stereo mini plug, Red; for connecting Crestron or AMX systems to rear panel RS232 serial input jack.
21580
Connector, 5 pos, depluggable, plug
21558
Connector, 25-pin, female D, plug
21499
USA Power Cord
NEMA 5-15 plug

See also AC Power Cords
21716
CAT5 cable, 6” long, for connecting two or more DM series units together.
21713
USB cable, 6' long, used to configure DM system from computer system via USB serial communications.
35679
Screwdriver