UM400a
#21359
Description:
Female, 5-pin TA5F plug
#21793
Description:
SMA right angle adapter, male to female, for SMA antennas
#AMJ (Specify Block)
Description:
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Specify the block such as AMJ-24. Construction is of nearly indestructible steel wire rope with a stainless steel connector. See also user block selectable kit, AMJKIT.
#AMJKIT
Description:
Whip antenna for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Comes with antenna, assorted color caps and cutting template. See also user block selectable kit, AMJXX.
Click here for Cutting Template for antenna/block length
#AMM (Specify Block)
Description:
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Specify the block such as AMM-24. Construction is of nearly indestructible steel wire rope with a stainless steel connector. See also user block selectable kit below, AMM KIT.
#AMM KIT
Description:
Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. The block is selected by the user and the antenna is cut to an included template's recommended length. Rugged wire cutters are required. Multiple color coded caps are included. Construction is of nearly indestructible steel wire rope with a stainless steel connector. See also the precut to a block antenna above, the AMM.
Click here for Technical Data Sheet
#AMM-O
Description:
Color coded transmitter antenna caps
#CCMINI
Description:
A soft sided, padded and zippered carrying case for compact wireless systems such as the UCR400, UCR401, and other UCR units.
#HM172
Description:
Omni-directional headset mic, 5-pin plug. Sensitivity is moderate for use with speech or singing. Complete with windscreen and HF peak cap.
Click here for data sheet.
#ISO9VOLT
Description:
General purpose isolated battery eliminator without door. Uses a high frequency converter and transformer to isolate power supplies and break ground loops. Typically used in bag systems to prevent ground loops when using a common battery supply. For matching doors with hole for power plug, see below.
#MC41
Description:
Adapter cable, 37", mic level, XLRF to TA5F for all 5 pin transmitters.
#MUTE
Description:
Inline "no-pop" audio mute switch for all Lectrosonics transmtiters with 5-pin input jacks.
The Mute switch is an active device that is powered by any 5 pin Lectrosonics transmitter including the new Servo Input transmitters such as the LMa, UM400a, and SMV series. It works with any 2 wire lavaliere microphone wired according to Fig. 1 and will also work with most 3 wire lavalieres if they are wired according to Fig. 2.
Click here for data sheet
These microphone wirings will wor ...
Read More...
