UCR401
#21762
Description:
Neutrik right angle XLR female connector with 5 selectable cable outlet positions; cast metal housing.
#35679
Description:
Lectrosonics screwdriver and adjustment tool for setting transmitter gain and roll-off pots as well as for setting the frequency switches on some older receivers and transmitters.
#55007
Description:
Clear Lectrosonics AA battery caddy
#55008
Description:
Blue Lectrosonics AA battery caddy
#AMM-O
Description:
Color coded transmitter antenna caps
#CCMINI
Description:
A soft sided, padded and zippered carrying case for compact wireless systems such as the UCR400, UCR401, and other UCR units.
#DCR12/A4U
Description:
Power Supply for R400 Receiver; 90-240 VAC, 50/60 Hz input; 12 VDC (regulated), 400 mA max. output.
#P1200
Description:
Rain cover for UCR201 and UCR401
#PF25 (Specify Block)
Description:
Passive in-line RF filter with 25MHz passband. Passive in-line RF filter with 50MHz passband and DC Bias insertion point. Designed for use with VRMWB and VRField WB wide-band receiver systems in cases where the full bandwidth of the receiver is not needed. Specify two-block range when ordering. Specify block when ordering.
Click here for Data Sheet
#PF50 (Specify Blocks)
Description:
Passive in-line RF filter with 50MHz passband and DC Bias insertion point. Passive in-line RF filter with 50MHz passband and DC Bias insertion point to power remote amplifiers or active antennas. Designed for use with VRMWB and VRField WB wide-band receiver systems in cases where the full bandwidth of the receiver is not needed. Specify contiguous two-block range when ordering.
Click here for data sheet
#PS2212A
Description:
Power cable, 12", Hirose4 to dual DC coax
#VSR1
Description:
Velcro cable strain relief. One piece mounts to receiver and the cable is held between that piece and a mating cover piece.
