lectrosonics.com

You are here: Support

Product Support Pages

LecNet2 & Venue Support

LecNet2

LecNet2™ Software/USB Driver Installers for NEW Installations ONLY

This zip archive file contains the installers for the LecNet2 software package and USB drivers, but not the supporting documentation for LecNet2 products.

Unzip this file to a temporary folder on your hard drive, and open this folder using Windows File Explorer.

To install the LecNet2 Software Programs, run the Setup.exe program.

To install the 32-bit USB driver package, run the Install32-bitUsbDrivers.exe program.

To install the 64-bit USB driver package, run the Install64-bitUsbDrivers.exe program.

Release 22Jun11

Please Note: This release is intended for NEW 32-bit and 64-bit Windows installations, and is required for 64-bit Windows 7 PCs in particular.

It is NOT necessary to update PCs with existing, working LecNet2 software and USB driver installations. There are no changes in the LecNet2 software programs in this distribution, only changes to the USB driver package to support 64-bit Windows PCs.
DO NOT install the new 32-bit USB driver package over an existing, working installation on 32-bit Windows XP or Vista PCs - this will cause a conflict between old and new 32-bit driver packages which will prevent USB connections from working correctly.

The LecNet2 Software Installer installs the following programs:

DM812 Control Panel	1.5.2
DM1612 Control Panel	1.5.2
DM1624 Control Panel	1.5.2
DM84 Control Panel	1.3.2
DMTH4 Control Panel	1.2.1
DMPA12 Control Panel	1.0.2
VR Control Panel	2.9
Command Terminal	1.3.1
Net Server	1.1.3
LectroLink Utility	1.2
D4 Update Utility	1.0

These are the installers included in the LecNet2 Installation Disk release of 22Jun2011.

Attachments:
File	Description	File size	Last modified
lecnet2_inst_22Jun11.zip	LecNet2 Installer for NEW Installations ONLY	18513 Kb	11/04/2011 15:06

LecNet2™ System Design Kit Installer

This zip archive file contains the installer for the LecNet2 System Design Kit. Unzip this file to a temporary location on your hard drive and run the installer (setup.exe).

The Design Kit includes:

LecNet2 System Design Guide
This contains a comprehensive discussion of topics including automatic mic mixing, teleconferencing, mix-minus speaker zoning, and control systems for installed sound systems. It presents several example sound system designs:
- Boardroom/Conference Room
- Courtroom System
- City Council Chamber
- Collegiate Distance Learning Classroom
- Multi-room Combining System
- Worship Center
The kit includes Visio drawings for each example system as well as the supporting preset and macro files.
PagNag Calculator Program
This handy program is described in the Design Guide and is used for installed sound system acoustic calculations.
System Design drawings and templates
These include:
- Front and rear panel elevations for all members of the LecNet2 product family in multiple formats: .vsd, .dwg, .wmf, .eps, and more.
- Visio stencil files for all members of the LecNet2 product family.
- A Visio template file with drawing parameters, scales, and all stencils needed for LecNet2 system design in Visio.

The Design Kit is also included in the LecNet2 CD.

Attachments:
File	Description	File size	Last modified
lecnet2designkit.zip	Version 30Jun2009	99177 Kb	11/08/2010 09:11

LecNet2™ Firmware Updates

Firmware updates can be installed into a LecNet2 product using the Control Panel software (running on your PC or laptop computer) and a USB cable. The latest firmware for each product can be downloaded using the links below. These files are zip archives, and must be unzipped before use.

Be sure that you know which Venue Receiver model you have before attempting to update firmware, so that you select the correct download! The "Narrowband" Venue Receiver is the original model covering 2 frequency "blocks". The recently introduced "Wideband" models cover blocks 21 - 29 (VRMWB) or blocks 470 - 26 (VRMWBL). The "944 MHz" model (VRM944) covers only the special part 74 frequency band starting at, well, 944 MHz. Contact the factory for assistance if you have any doubt about the identity of a Venue Receiver.

Attachments:
File	Description	File size	Last modified
D4R	Version 2.4	253 Kb	01/12/2011 09:19
D4T	Version 2.2	235 Kb	11/08/2010 12:55
DM1612	Version 1.6.3	133 Kb	11/08/2010 12:48
DM1624	Version 1.6.3	133 Kb	11/08/2010 12:47
DM812	Version 1.6.3	133 Kb	11/08/2010 12:49
DM84	Version 1.2.9	102 Kb	11/08/2010 12:49
DMPA12	Version 1.1.0	62 Kb	11/08/2010 12:50
DMTH4	Version 2.2.0	124 Kb	11/08/2010 12:49
Narrowband Venue Receiver (VR)	Version 4.4	91 Kb	03/29/2011 15:42
944 MHz Venue Receiver (VRM944)	Version 1.2	86 Kb	11/08/2010 12:52
vrwb v5_0.zip (VRMWB, VRMWBL)	Version 5.0	98 Kb	01/28/2012 13:48
vr_e01 v5_0.zip (VR/E01)	Version 5.0	98 Kb	01/31/2012 17:34

LecNet2™ Crestron® Modules

Crestron modules and AMX code for the DM series automixers and telephone hybrid are currently available for download.

CRESTRON DM Series Automixers and Telephone Hybrid modules:

Each of the zip files below contain the Crestron archive, an example SIMPL .smw file, the associated VT-Pro E touchpanel file in XPanel format, an .xexe PC executable for quick testing and module documentation.

These modules will be included within the SIMPL windows library in the near future.

Click here for installation instructions. The DM series modules will work with all of the DM series matrix mixers including: DM1624, DM1612, DM812 and DM84.

DM Series (Single Channel and Stereo Control) Modules
Version 1.0 - updated 9Oct2007
- DM series Single Input Gain
- DM series Single Rp Input Gain
- DM series Single Output Gain
- DM series Single Rp Output Gain
- DM series Stereo Input Gain
- DM series Stereo Rp Input Gain
- DM series Stereo Output Gain
- DM series Stereo Rp Output Gain
- DM series Crosspoint Gain
DM1624 (Multiple Channel Control) Modules
Version 1.0 - updated 9Oct2007
- DM1624 Multi Input Gain
- DM1624 Multi Rp Input Gain
- DM1624 Multi Output Gain
- DM1624 Multi Rp Output Gain
DM1612 (Multiple Channel Control) Modules
Version 1.0 - updated 9Oct2007
- DM1612 Multi Input Gain
- DM1612 Multi Rp Input Gain
- DM1612 Multi Output Gain
- DM1612 Multi Rp Output Gain
DM812 (Multiple Channel Control) Modules
Version 1.0 - updated 9Oct2007
- DM812 Multi Input Gain
- DM812 Multi Rp Input Gain
- DM812 Multi Output Gain
- DM812 Multi Rp Output Gain
DM84 (Multiple Channel Control) Modules
Version 1.0 - updated 9Oct2007
- DM84 Multi Input Gain
- DM84 Multi Rp Input Gain
- DM84 Multi Output Gain
- DM84 Multi Rp Output Gain
DMTH4 (Basic Control) Module
Version 1.0 - updated 9Oct2007
- DMTH4 Basic Control

Send email to Applications Engineer This e-mail address is being protected from spambots. You need JavaScript enabled to view it. if you have any questions, or call him at (505)994-9825.

Crestron is a registered trademark of Crestron Electronics, Inc.

Attachments:
File	Description	File size	Last modified
DM1612.zip	DM1612 (Multiple Channel Control) Modules	2140 Kb	11/08/2010 11:18
DM1624.zip	DM1624 (Multiple Channel Control) Modules	2160 Kb	11/08/2010 11:17
DM812.zip	DM812 (Multiple Channel Control) Modules	2124 Kb	11/08/2010 11:26
DM84.zip	DM84 (Multiple Channel Control) Modules	2114 Kb	11/08/2010 11:28
DMTH4.zip	DMTH4 (Basic Control) Module	498 Kb	11/08/2010 11:28
DM_Series.zip	DM Series (Single Channel and Stereo Control) Modules	4778 Kb	11/08/2010 11:16

LecNet2™ AMX Netlinx® Code

AMX code for the DM series automixers and telephone hybrid are currently available for download.

AMX code for DM Series Automixers and Telephone Hybrid modules:

The zip file below contain the AMX Netlinx source code, TP4 Design touchpanel and instructions. the file is in AMX archive format for your convenience.

AMX Code
Version 1.0 - updated 9Oct2007
- AMX Netlinx archive and Touchpanel files