lectrosonics.com

 
 
You are here: Products Accessories
 
 
Listings 

#13585

#13585 Description: Screw on mic clip for standard mic stands with 5/8"-27 thread to hold all HH & UT series Handheld Transmitters

#14040

#14040 Description: Vinyl general purpose shoulder strap.

#14247

#14247 Description: Rack mount handle.

#21357

#21357 Description: Locking Switchcraft micro plug, 1/8", for M170 and M175 series transmitters

#21359

#21359 Description: Female, 5-pin TA5F plug

#21425

#21425 Description: 6 ft. long power cord, coaxial to stripped and tinned leads. Coaxial plug: ID-.080"; OD-.218"; Depth- .5".

#21472

#21472 Description: 6 ft. long power cord; coaxial to stripped and tinned leads. Right angle coaxial plug: ID-.075"; OD-.218"; Depth- .375". Fits all compact receiver models that use CH12 power supply. ...
Read More...

#21499

#21499 Description: AC power cord female LEC320 to Edison plug

#21500

#21500 Description: 10 position plug with screw terminals, depluggable

#21505

#21505 Description: 7 position plug with screw terminals, depluggable

#21511

#21511 Description: AC power cord stripped, ready for installation of appropriate AC power plug.

#21529-1

#21529-1 Description: RS232 serial cable with a DB-9 to a 3.5mm miniphone stereo plug

#21531

#21531 Description: 3 position plug for 21530, BEAU, 86053

#21537

#21537 Description: D-submini, M-15P, panel mount jack. See also #21538

#21538

#21538 Description: Shell for D-submini 15-pin plug. See also #21537.

#21548

#21548 Description: 4 position plug, depluggable.

#21551

#21551 Description: 12" cable, 8-pin Mini-DIN to Mini-DIN

#21552

#21552 Description: 15 ft. wall to phone cable with standard RJ-11 connectors

#21553

#21553 Description: Male 9-pin D-sub jack. See #21554.

#21554

#21554 Description: Shell, 9-pin D-sub plug. See #21553.

#21558

#21558 Description: D-25 pin female plug

#21580

#21580 Description: 5 position plug, depluggable

#21586

#21586 Description: 6 ft. long power cable; locking LZR type plug to stripped and tinned leads.

#21592

#21592 Description: 24" 8-pin Mini-DIN to Mini-DIN cable

#21607

#21607 Description: 3 position plug with screw terminals, depluggable

#21642

#21642 Description: Euro power plug, CEE 7/7 (Schuko) plug

#21643

#21643 Description: UK power cord BS 1363 plug

#21644

#21644 Description: Australian power cord S3112 plug

#21710-1

#21710-1 Description: AMX/Crestron cable

#21713

#21713 Description: MB USB A2B cable

#21716

#21716 Description: 12" CAT-5 RJ 45 cable. NOT Compatable with Aspen Series

#21746

#21746 Description: 1 ft. DC power cord with locking ring for VR Field, stripped and tinned. See #21747 for 6 ft length.

#21747

#21747 Description: 6ft. DC power cord for VR Field, stripped and tinned. See #21746 for 1 ft length.

#21750

#21750 Description: Polarity-reversing (pin 2 to 3 , 3 to 2) XLR barrel adapter used with HM and UH400 transmitters. Commonly used with some Earthworks test mics to reduce current draw and excess noise.

#21762

#21762 Description: Neutrik right angle XLR female connector with 5 selectable cable outlet positions; cast metal housing.

#21769

#21769 Description: Female BNC to female BNC connector. Commonly used to interface cables to whip antennas or to connect two cables. Minimal loss, 50 Ohms.

#21770

#21770 Description: Coaxial adapter. Male SMA to female BNC. Adapts antennas with male BNC connectors to SMA jacks.

#21793

#21793 Description: SMA right angle adapter, male to female, for SMA antennas

#21798

#21798 Description: USB cable for firmware updates; USB 2.0 to mini-b; 2 meter length.

#21802

#21802 Description: 12" Cat-6 cable for connecting ASPEN units. Also see #21792.

#21808

#21808 Description: Coaxial cable.

#24719

#24719 Description: Blue Velcro cable wrap with Lectro logo.

#25877

#25877 Description: Angle bracket for rack mounting UDR200/700 receivers (part of kit). See #25878 and #25879

#25878

#25878 Description: Block for rack mounting UDR200/700 receivers, narrow (part of kit). See #25879

#25879

#25879 Description: Block for rack mounting UDR200/700 receivers, wide (part of kit). See #25878

#25984

#25984 Description: Replacement belt clip for Quadra M4R

#25986

#25986 Description: Reataining clip for power cord

#25989

#25989 Description: Rack mount ear flange.

#25990

#25990 Description: Rear mounting bracket for Quadra M4T

#25991

#25991 Description: Front mounting bracket for Quadra M4T